Slabhra Ceangailte Galbhánaithe G80 3mm agus 2mm Slabhra Nasc Ardaithe Cruach Cóimhiotail Ard-Teanntachta le haghaidh Ardaitheora Leictrigh
Slabhra Ceangailte Galbhánaithe G80 3mm agus 2mm Slabhra Nasc Ardaithe Cruach Cóimhiotail Ard-Teanntachta le haghaidh Ardaitheora Leictrigh
Catagóir
Ardú agus ceangal, slabhra ardaithe,slabhra nasc gearr, ardú slabhra nasc cruinn,Slabhra Grád T, slabhra Grád DAT,Slabhra Grád DT, DIN EN 818-7slabhra nasc gearr le haghaidh críocha ardaithe,slabhra ardaitheora caoinfhulaingt mhín,slabhra cruach cóimhiotail
Feidhmchlár
Ardú agus ceangal, ualaí a ardú, ualaí a cheangal
Mar mhonaróir slabhraí nasc cruach bhabhta le 30 bliain, tá ár monarcha ag freastal ar an tréimhse ríthábhachtach d'éabhlóid thionscal déanta slabhraí na Síne agus ag freastal uirthi, ag freastal ar riachtanais mhianadóireachta (mianach guail go háirithe), ar ardú trom, agus ar riachtanais iompair thionsclaíoch maidir le slabhraí nasc cruach bhabhta ard-neart. Ní stadfaimid de bheith ar an monaróir slabhraí nasc bhabhta is mó sa tSín (le soláthar bliantúil os cionn 10,000T), ach cloímid le cruthú agus nuálaíocht gan stad.
Fíor 1: slabhra/naisc ardaitheora
Eochair
| 1 | Trasnú líne lár an naisc | l | an fad ilpháirce |
| p | an pháirc | dm | trastomhas an ábhair mar a tomhaiseadh é |
| ds | is é trastomhas an táthú | e | an fad a mbíonn tionchar toisí ag an táthú air |
| w3 | an leithead inmheánach ag an táthú | w2 | an leithead seachtrach thar an táthú |
Tábla 1: toisí slabhra/naisc an ardaitheora (mm)
| Nominal size dn | Material diameiteartolerance | Pitch | Width | Gauge length of 11 x pn | Waois diameitear ds max. | |||
|
pn |
tolerance1) | internal w3 min. | external w2 max. |
l |
tolerance1) | |||
| 4 | ± 0.2 | 12 | 0.25 | 4.8 | 13.6 | 132 | 0.6 | 4.3 |
| 5 | ± 0.2 | 15 | 0.3 | 6.0 | 17.0 | 165 | 0.8 | 5.4 |
| 6 | ± 0.2 | 18 | 0.35 | 7.2 | 20.4 | 198 | 1.0 | 6.5 |
| 7 | ± 0.3 | 21 | 0.4 | 8.4 | 23.8 | 231 | 1.1 | 7.6 |
| 8 | ± 0.3 | 24 | 0.5 | 9.6 | 27.2 | 264 | 1.3 | 8.6 |
| 9 | ± 0.4 | 27 | 0.5 | 10.8 | 30.6 | 297 | 1.4 | 9.7 |
| 10 | ± 0.4 | 30 | 0.6 | 12.0 | 34.0 | 330 | 1.6 | 10.8 |
| 11 | ± 0.4 | 33 | 0.6 | 13.2 | 37.4 | 363 | 1.7 | 11.9 |
| 12 | ± 0.5 | 36 | 0.7 | 14.4 | 40.8 | 396 | 1.9 | 13.0 |
| 13 | ± 0.5 | 39 | 0.8 | 15.6 | 44.2 | 429 | 2.1 | 14.0 |
| 14 | ± 0.6 | 42 | 0.8 | 16.8 | 47.6 | 462 | 2.2 | 15.1 |
| 16 | ± 0.6 | 48 | 0.9 | 19.2 | 54.4 | 528 | 2.5 | 17.3 |
| 18 | ± 0.9 | 54 | 1.0 | 21.6 | 61.2 | 594 | 2.9 | 19.4 |
| 20 | ± 1.0 | 60 | 1.2 | 24.0 | 68.0 | 660 | 3.2 | 21.6 |
| 22 | ± 1.1 | 66 | 1.3 | 26.4 | 74.8 | 726 | 3.5 | 23.8 |
| 1) These tolerances are usually divided into + 2/3 and – 1/3 for both the individual link and thestandard gauge length. | ||||||||
Tábla 2: teorainn ualaigh oibre slabhra ardaitheora (WLL)
| Nominal size dn mm | Chain type T t | Chain type DAT t | Chain type DT t |
| 4 5 6 | 0.5 0.8 1.1 | 0.4 0.63 0.9 | 0.25 0.4 0.56 |
| 7 8 9 | 1.5 2 2.5 | 1.2 1.6 2 | 0.75 1 1.25 |
| 10 11 12 | 3.2 3.8 4.5 | 2.5 3 3.6 | 1.6 1.9 2.2 |
| 13 14 16 | 5.3 6 8 | 4.2 5 6.3 | 2.6 3 4 |
| 18 20 22 | 10 12.5 15 | 8 10 12.5 | 5 6.3 7.5 |
| mean stress N/mm2 | 200 | 160 | 100 |
Tábla 3: fórsaí cruthúnais déantúsaíochta slabhra ardaitheora agus fórsaí briste
| Nominal size dn mm | Manufacturing proof force (MPF) kN misteach | Breaking force (BF) kN misteach |
| 4 | 12.6 | 20.1 |
| 5 | 19.6 | 31.4 |
| 6 | 28.3 | 45.2 |
| 7 | 38.5 | 61.6 |
| 8 | 50.3 | 80.4 |
| 9 | 63.6 | 102 |
| 10 | 78.5 | 126 |
| 11 | 95 | 152 |
| 12 | 113 | 181 |
| 13 | 133 | 212 |
| 14 | 154 | 246 |
| 16 | 201 | 322 |
| 18 | 254 | 407 |
| 20 | 314 | 503 |
| 22 | 380 | 608 |
Tábla 4: fadú deiridh iomlán agus cruas dromchla
|
| hóst chain types | ||
| T | DAT | DT | |
| Total deiridhimate fadún A%min | 10 | 10 | 5 |
| Surface haran lás min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
